Nvidia Spectrum-4 - Page 50

NVIDIA Spectrum-4 SN5000 2U Switch Systems Hardware User Manual 49
LED
Behavior
Description Action Required
Solid
Amber
PSU failure (voltage, current,
temperature or fan related issue)
Off
No AC power to all power
supplies.
Plug in the AC cor
Unit Identification LED
The UID LED is a debug feature, that the user can use to find a particular system within a
cluster by turning on the UID blue LED.
To activate the UID LED on a switch system, run:
To verify the LED status, run:
To deactivate the UID LED on a switch system, run:
Port LEDs
SN5400 Port LEDs SN5600 Port LEDs
switch (config) # led MGMT uid on
switch (config) # show leds
Module LED Status
--------------------------------------------------------------------------
MGMT UID Blues
switch (config) # led MGMT uid off