HeatWater.com | WaterService@nyle.com | (800) 777-6953 | Rev. IM-E360-060523
General Description
7
Controls and Electrical:
The e-Series line is available in 208-230 and in 440-480 3 phase variants. Units
require a main power feed and a secondary 120v power feed for the onboard
freeze protection, controls, and circulator. It is strongly recommended that the
120v power feed come from a power source with a backup generator if the unit
is installed in a location that experiences freezing conditions, allowing freeze
protection to continue during a power outage. Optionally, a Unified Power
Package accessory can be ordered and installed to bring all power in through a
single primary voltage power feed.
All e-Series units are MODBUS and BACNET capable, ready to be integrated
into BMS systems by 3rd party integrators using Bacnet/IP and MSTP protocols.
All units also ship with internet accessibility for observation, alarms, and
troubleshooting on Nyle’s Nimbus online portal.
All e-Series units have a CTA-2045 port for power utility demand management
and are certified UL 1995.
For more information:
Please refer to the Performance Specifications for appropriate operating ranges
and requirements. If more detailed information is required than is available in this
manual, please contact Nyle Water Heating Systems for additional assistance.
To Next Page
Loading...
