O2 x1 - Security

8180
Security
• From the idle screen, press , then , then
PIN code 1
• Press to select PIN code 1
• Enter your desired PIN code and
press to save
Change PIN 1
•To change PIN 1 press to select Change PIN 1
• Enter your old PIN code followed by the new code
2
ABC
OK
1
4
GHI
6
MNO
OK
Data cable
• Press to select Data cable
• Then set each of the following parameters
and press to save
• Bit rate (300 / 1200~ / 115200)
• Reset
GPRS*
• Press to select GPRS
• Then set each of the following parameters
and press to save
• Attach on
• Accept calls – mark this to enable it
*WAP charges may apply.
OK
2
ABC
OK
1