40
616 02 1018 00
When the Observer Control is installed as a Zone Sensor, the
overall functionality of the control and screens available will be
different from those found on the Master Zone Control.
From each individual Zone Sensor, you can override the
program schedule by using the Hold, Heat To or Cool To
settings for each zone which can be accessed by pressing the
Zone Name button located in the bottom left hand section of the
Home Screen.
NOTE: See Adjusting Temperature (Temporary Hold) and
Hold Current Temperature sections for complete details.
The basic information displayed on the Home Screen of the
Zone Sensor consists of the following:
·Current schedule period: WAKE, DAY, EVE, or SLEEP
To Next Page
Loading...
