41
616 02 1018 00
Note: Use the Master Control to setup
Schedules for each individual Zone
·Date and time
Note: Date and Time information is supplied to
the Zone Senor from the Master Control
·Room temperature (Zone specific)
·Actual Outdoor temperature (System specific)
·System Mode: OFF, HEAT, COOL, AUTO or EMHT (if
applicable)
Note: Any changes to the System Mode from the
Zone Sensor are global in nature and will impact
the entire system.
·Fan mode: AUTO, LOW, MED or HIGH
Note: Any changes to the System Mode from the
Zone Sensor are global in nature and will impact
the entire system.
·Hold (Zone specific)
·Heat To setting (Zone specific)
·Cool To settings (Zone specific)
To Next Page
Loading...
