Introduction 1-3
Introduction
Features Overview
Connects to the Network or Main Frame via the Network Print Controller75 and the
Network Interface Card, enabling the system to function as a network printer or print
server on the network.
The Océ 750 electronically digitizes images then outputs in various ways controlled by
software. The digitized image is represented as pixels on a screen or as dots per inch
(dpi) on hard print.
• 600dpi Mode
Scans with a higher resolution (600dpi) than normal mode (400dpi).
• All-Image Area
Prints completely to the edges of the paper to avoid image loss.
• ATS - Automatic Tray Switching
Automatically switches to another tray when a tray becomes empty during a print job.
• Auto Low Power
Automatically lowers the power after a specified period of printer inactivity.
• Auto Reset
Automatically resets to auto mode defaults after a specified period of printer inactivity.
• Auto Shut-Off
Automatically shuts off the main body power after a specified period of printer inactivity.
• Chapter
Places chapter pages on the righthand side in duplex mode.
• Duplex Mode
Selects the duplex printing mode.
• Manual Shut-off
Shuts off the main power with the [
POWER SAVER ON/OFF] key.
• Non STD Size for Multi-Sheet Bypass Tray
Allows you to indicate a special paper size to be loaded in the Multi-sheet bypass tray.
To Next Page
Loading...
