Configuration
Dimmer
You can adjust the back-light of the LCD with the below settings.
Power Saving
You can set the back-light to dim down when there is no operation
for a certain time of period.
Turn on
You can adjust the back-light level for the operation mode, i.e.
when you are operating the radio or checking on the menu.
Display
You can choose the display in color or monochrome style.
Power Management
This function is to allow the radio to go to Standby mode if there is
no internet signal received in order to save power. The default
setting is 30 minutes. When the radio does not receive any
internet signal, the radio will go into Standby after 30 minutes.
Other time frames for 5 minutes and 15 minutes are available.
Sleep Timer
You can set the timer to put the radio in standby after certain
amount of time has elapsed, from 15 minutes to 180 minutes with
15 minute intervals.
You can also activate the setting with the <Sleep> button from
the remote control. When you press <Sleep>, you can see the
sleep timer on the top right corner of the display.
Buffer
Sometimes you may experience uneven playback of the internet
radio. This can happen if the internet connection is slow or
network congestion occurs. To help improve the situation, you
can choose a longer buffer time to get a few seconds of radio
streaming before beginning to play. The default value is 2
seconds. You can choose 4 or 8 seconds if you prefer to have a
longer buffering time.
- 15 -
To Next Page
Loading...
