113
USER SET DIGITAL GAUGE MODE
When Digital Gauge Mode is set for ON, the ATOM will operate
as a Digital Depth Gauge/Timer without performing nitrogen and
oxygen calculations.
Main (Default) Display information includes (Fig. 105) -
> Transmitter Link icon
> Max Depth with symbols MAX and FT (or M)
> Elapsed Dive Time with symbols DIVE and TIME
> Current Depth with symbol FT (or M)
• Press/release the A button to view the Alternate Display (Air
Time Remaining and Tank Pressure).
• Press/hold the A button for 2 seconds to view the Secondary
Display (Temperature and Time of Day).
• Press/release the S button to acknowledge/silence Alarms.
• Press the L button to activate the Backlight.
NOTE: Once a dive is made with the ATOM set
for Digital Gauge Mode, you must wait 24 hours
after surfacing before the ATOM resets and will
operate as a dive computer.
Fig. 105 - Digital Gauge Main
To Next Page
Loading...
