EasyManua.ls Logo

Oceanic ATOM - Summary of Warning and Alarm Messages

Oceanic ATOM
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
114
SUMMARY OF WARNING AND ALARM MESSAGES
MESSAGE MEANING
VIEW > AIR Air Time Remaining is less than No Deco and O2 times.
DECO > STOP > xxFT (M) Entry into Decompression Mode.
DOWN > TO > xxFT (M) Above a Required Decompression Stop Depth.
DECO > STOP > 60FT (20M) Deco Stop greater than 60FT (20M) required.
HIGH > PO2 High PO2 while in Deco Mode.
UP > HIGH > PO2 High PO2 set point alarm while in No Deco Mode.
UP > HIGH > O2 High O2 alarm.
TOO > DEEP Depth set point Alarm.
UP > VIOL Deco Stop greater than 70 FT (21 M) required.
SLOW > SLOW Ascent Rate Too Fast Warning/Alarm.
LOW > AIR > TIME Air Time Remaining less than 5 minutes alarm.
LOW > DIVE > TIME Dive Time Remaining (NDC, O2, or ATR) set point alarm.
TURN > GAS > ALRM TMT1 Turn Pressure set point alarm.
END > GAS > ALRM TMT End Pressure set point alarm (Transmitter in use).
TIME > TOO > LONG Elapsed Dive Time set point alarm.
UP > HIGH > Ni TLBG set point alarm.
TMT1 > LINK > LOST Active TMT Transmission Link lost (also TMT2 and TMT3).
TMT1 > NotAvAil TMT not active (also TMT2 and TMT3).
SWCH > GAS Switch to the new Gas being used.
DONT > SWCH Don't Switch to the new Gas (exposure to excess PO2).

Related product manuals