28
SET COUNTDOWN TIMER
Information includes (Fig. 19):
> Graphics TIMR and SEt.
> TIME symbol and HOUR Set Point (hr:) flashing.
• Depressing and holding the S button while the HOUR Set
Point is flashing will scroll through the Set Points in 1 hour
increments at a rate of 4 per second from 0: to 23: (hr).
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will save the HOUR Set Point and/or advance to Set
MINUTES with the Set Point flashing.
• Depressing and holding the S button while the MINUTES Set
Point is flashing will scroll through the Set Points in 1 minute
increments at a rate of 4 per second from :00 to :59 (min).
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will save the MINUTES Set Point and/or advance to the
COUNTDOWN TIMER screen indicated by the graphic OFF
(flashing) in place of the graphic SEt.
• Pressing and releasing the S button momentarily (< 2 sec-
onds) will toggle from OFF to ON and Start the Timer (Fig.
20).
• Depressing and holding the M button for 2 seconds will revert
to the Local Default Time screen.
• If no button is pressed during a period of 2 minutes, the unit
will revert to the Local Default Time screen.
Fig. 20 - Timer Started
Fig. 19 - Set Timer
To Next Page
Loading...
