63
SET U GROUP (UTILITIES)
Set U Sequence:
SET U > Wet Activation > Units > Safety Stop > Conservative
Factor > Backlight Duration > Sampling Rate > Transmitter 1
Code > Transmitter 2 Code > Transmitter 3 Code.
HINT: The SET U Group can be set/changed
using the PC Settings Upload program as well as
by using the buttons.
> SET U Settings remain at the values set until changed.
> Depressing the A and S buttons simultaneously for 6 seconds
while in the SURFACE MODE, will access SET U identified by
the graphic SETU (Fig. 60).
> Pressing and releasing the A button momentarily (< 2 sec-
onds) while SET U is displayed will advance to SET WET
ACTIVATION with the Set Point flashing.
Fig. 60 - Set U
To Next Page
Loading...
