Need help?Do you have a question about the Oceanic OCi and is the answer not in the manual?
Details battery type, shelf life, use life, and replacement recommendations.
Indicates no-deco or decompression status.
Visually represents ascent speed, warning of too fast rates.
Sets the primary time displayed on the watch and used in dive modes.
Sets the current hour and minute for the watch.
Details the NORM, GAUG, FREE, and TECH FREE dive modes and their activation.
Explains functions available on the surface in NORM mode.
Provides access to NORM mode functions like Plan, Log, and Set Alarms.
Guides users through planning dives by displaying depths and no-deco times.
Navigates through settings for Gas 1, Gas 2, Gas 3, Gas 4, and FO2 50% Default.
Sets Oxygen percentage and PO2 alarm for Gas 1.
Sets Oxygen percentage and PO2 alarm for Gases 2, 3, and 4.
Configures depth alarms for NORM and GAUG modes.
Enables or disables deep stops for no-deco dives.
Links transmitters by serial number and enables/disables them.
Shows the status of the OCi's battery and linked transmitters.
Displays dive time remaining, depth, gas, and air time.
Monitors safety stop depth and time progress.
Monitors safety stop timer progress.
Displays decompression stop depth, time, gas, and pressure.
Details the warning and alarm for high PO2 during no-deco dives.
Explains PO2 alarm behavior during decompression stops.
Interface for selecting gases for switching.
Initiates the switch to a selected gas and transmitter.
Alerts the user if a gas switch results in unsafe PO2 levels.
Provides access to GAUG mode functions like Fly, Log, and Set Alarms.
Enables or disables the audible alarm for FREE/TECH FREE dive events.
Allows selection of NORM, GAUG, FREE, or TECH FREE dive modes.
Displays dive data for FREE dives, including countdown timer.
Displays dive data for TECH FREE dives, including countdown timer.
Crucial safety warnings for free diving activities.
Allows setting a specific reference heading for navigation.
Procedure for calibrating the compass for accurate readings.
Instructions for connecting the OCi to a PC for data transfer and settings.
Detailed instructions and precautions for replacing the OCi battery.
Provides detailed specifications for the OCi dive computer.
Details algorithms, NDL limits, and decompression standards used.
Covers accuracy, activation, dive counter, log mode, altitude, battery, and temperature.
Specifies operational elevation limits and altitude compensation.
Details battery type, shelf life, use life, and icon indicators.
Details battery type, shelf life, use life, and replacement recommendations.
Indicates no-deco or decompression status.
Visually represents ascent speed, warning of too fast rates.
Sets the primary time displayed on the watch and used in dive modes.
Sets the current hour and minute for the watch.
Details the NORM, GAUG, FREE, and TECH FREE dive modes and their activation.
Explains functions available on the surface in NORM mode.
Provides access to NORM mode functions like Plan, Log, and Set Alarms.
Guides users through planning dives by displaying depths and no-deco times.
Navigates through settings for Gas 1, Gas 2, Gas 3, Gas 4, and FO2 50% Default.
Sets Oxygen percentage and PO2 alarm for Gas 1.
Sets Oxygen percentage and PO2 alarm for Gases 2, 3, and 4.
Configures depth alarms for NORM and GAUG modes.
Enables or disables deep stops for no-deco dives.
Links transmitters by serial number and enables/disables them.
Shows the status of the OCi's battery and linked transmitters.
Displays dive time remaining, depth, gas, and air time.
Monitors safety stop depth and time progress.
Monitors safety stop timer progress.
Displays decompression stop depth, time, gas, and pressure.
Details the warning and alarm for high PO2 during no-deco dives.
Explains PO2 alarm behavior during decompression stops.
Interface for selecting gases for switching.
Initiates the switch to a selected gas and transmitter.
Alerts the user if a gas switch results in unsafe PO2 levels.
Provides access to GAUG mode functions like Fly, Log, and Set Alarms.
Enables or disables the audible alarm for FREE/TECH FREE dive events.
Allows selection of NORM, GAUG, FREE, or TECH FREE dive modes.
Displays dive data for FREE dives, including countdown timer.
Displays dive data for TECH FREE dives, including countdown timer.
Crucial safety warnings for free diving activities.
Allows setting a specific reference heading for navigation.
Procedure for calibrating the compass for accurate readings.
Instructions for connecting the OCi to a PC for data transfer and settings.
Detailed instructions and precautions for replacing the OCi battery.
Provides detailed specifications for the OCi dive computer.
Details algorithms, NDL limits, and decompression standards used.
Covers accuracy, activation, dive counter, log mode, altitude, battery, and temperature.
Specifies operational elevation limits and altitude compensation.
Details battery type, shelf life, use life, and icon indicators.
General| Display Type | LCD |
|---|---|
| Wireless Air Integration | Yes |
| Dive Log Capacity | 24 dives |
| Alarms | Audible and visual |
| Operating Modes | Air, Nitrox, Gauge |
| Air Integration | Yes |
| Water Resistance | 100 m (330 ft) |
| Maximum Operating Depth | 100 m (330 ft) |
| Compass | Yes |
| Wireless Connectivity | Bluetooth |
| Dimensions | 75mm x 55mm x 18mm |
| Operating Temperature | -5°C to 40°C |
To Next Page
