Oceanic OCi - Overview; Free & Tech Free Surface Mode; Dive Mode

48
OCi OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-5335-r02 (9/12/13)
Light
Main Menu
SURF
MAIN
M
2s
Watch Mode
Compass
M
< 2s
A
< 2s
>
SEL TIMER
CDT SETUP
LOG/HIST
SET ALARMS
SET UTILITIES
OP MODE
OCi ID
access
selection
ALTs
at
5 FT (1.5 M)
for 5 sec
at
2 FT (0.6 M)
for 1 sec
Surface Mode
Dive Mode
FREE & TECH FREE
SURFACE MODE
S 2 sec to revert
from Menu
to SURF Main.
OVERVIEW
FREE Mode and TECH FREE Mode are similar in many respects and share various functions such as settings. However, they have specifi c differences to be
considered prior to commencing activities in the selected mode. Listed here are several.
FREE DIVE MODE (for dives to 330 FT/100 M)
> Performs calculations relating to nitrogen-oxygen which carryover between NORM and FREE.
> Allows FREE diving activities before and after SCUBA activities.
> Allows unrestricted use of operating buttons during dives for control of the Backlight and Timers.
> Features 3 Depth Alarms set for progressively deeper depths.
TECH FREE DIVE MODE (for dives to 495 FT/150 M)
> Requires a 24 hour post dive period before SCUBA activities can be conducted.
> Use of operating buttons during dives for control of the Backlight and Timers is limited to less than 330 FT/100 M.
> Features 6 Depth Alarms with independently adjusted audibles that operate during both descent and ascent.
> Features Auto Glo that turns the Backlight ON for the entire dive upon descent.
Note that this reduces battery life signifi cantly.
> Allows setting the Sampling Rate at which data is recorded for subsequent download to the Oceanlog PC program.
S
2s
A
< 2s
L
M
< 2s
M, S
2s
S
< 2s
Reset Timer
A
2s
Start/Stop Timer
S
< 2s
Reset Dive # to 0
A+S
2s
DIVE MODE
Light
DIVE
MAIN
Compass
ALT
S
2s
A
< 2s
L*
Reset Timer
A
2s
Start/Stop Timer
S
< 2s
*or Auto Glo if ON
in TECH FREE.