Oceanic ATOM - COUNTDOWN TIMER

26
Once the Differential is selected and saved, Alternate Time/Date
values will be based upon the MAIN TIME Set Points.
Set ALTERNATE TIME information includes (Fig. 17):
> Lazy 8 symbol and graphic OFF, or the +/- numeric Hour
Differential Set Point, flashing.
• Depressing and holding the S button while the Set Point is
flashing will scroll through the Set Points in increments of 1
Hour at a rate of 4 per second.
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will save the Set Point and/or advance to the ALTER-
NATE TIME screen.
• Depressing and holding the M button for 2 seconds will revert
to the MAIN TIME screen.
If no button is pressed during a period of 2 minutes, the unit will
revert to the MAIN TIME screen.
COUNTDOWN TIMER
Pressing the M button momentarily 2 times (< 2 seconds each)
while the Local Default Time screen is displayed will access the
Countdown TIMER screen, displaying the remaining Countdown
Time (hr:min) if running, or OFF (flashing) and the previously set
Countdown Time if the set Countdown started and has ended, or
OFF (solid) and 0:00 if no time was previously set.
Fig. 17 - Set Alternate Time