29
CHRONOGRAPH (Stop Watch/Lap Timer) (Fig. 21)
• Pressing and releasing the M button momentarily 3 times (< 2
seconds each) while the MAIN TIME screen is displayed will
access the CHRONOGRAPH displaying the elapsed time if
previously started or 0:00:00.00 (hr:min:sec.1/100th sec),
flashing (Fig. 21).
• Pressing and releasing the S button momentarily (< 2 sec-
onds) will start the TIMER which will begin counting up from
0:00:00.00 to 99:59:59.99 (hr:min:sec.1/100th sec) in
increments of .01 (1/100th sec).
• During the first 4 seconds the 1/100th second values will be
displayed, then 2 dashes (. - - ) will be displayed. The 1/
100th values will be recorded and displayed when Laps are
frozen and when later recalled.
• Subsequent pressing and releasing of the S button (< 2
seconds each) will freeze Lap Times (LAP1 through LAP9).
After 9 Laps are recorded, additional Laps will replace LAP9,
shift the others to lower Lap numbers, while discarding LAP1.
• If is Timer reaches 99:59:59.99, it will stop and save that
number as a Lap. Subsequent presses of the S button will
then have no effect.
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will Stop the Timer and Recall LAP1, displaying the
graphic LAP1 (flashing) and the Lap 1 Time. Repeat presses
will display other Laps/Times (Fig. 22).
(continued on page 30)
Fig. 22 - Lap Recall
Fig. 21 - Chronograph
To Next Page
Loading...
