143
DIVE COMPUTER SURFACE MODES (continued) -
Set D Group (Dive Data): Factory Settings:
> FO2 GAS1 (Air, 21 to 50%) > Air
> FO2 GAS2 (Air, 21 to 100%) > Air
> FO2 GAS3 (Air, 21 to 100%) > Air
> FO2 Default (On/Off) > On
> Receiver (On/Off) > Off
> Digital Gauge Dive Mode (On/Off) > Off
Set A Group (Alarms):
> Audible Alarm / LED Warning (On/Off) > On
> Max Depth Alarm (30 to 330 feet /9 to 99 meters) > 330 feet
> Elapsed Dive Time Alarm (:10 to 3:00 hr:min) > 3:00 (hr:min)
> Max TLBG Alarm (1 to 5 segments) > 5 segments (Deco)
> Dive Time Remaining Alarm (:00 to :20 min) > :20 (min)
> Turn Press Alarm (Off, 1000 to 3000 PSI / 69 to 205 BAR) > Off
> End Press Alarm (300 to 1500 PSI / 20 to 104 BAR) > 300 PSI
> Max PO2 Alarm (1.20 to 1.60 ATA) > 1.60 (ATA)
Set U Group (Utilities):
> Wet Activation (On/Off) > On
> Units of Measure (Imperial / Metric) > Imperial
> Safety Stop Time, Depth (Off/3/5 minutes, 10/15/20 FT, 3/4.5/6 M) > 3:00 (min:sec)
> Conservative Factor (On/Off) > Off
> Backlight Duration (0/5/10 seconds) > :05 (sec)
> Sampling Rate (2/15/30/60 seconds, 2/5/10 feet, .5/1.5/3 meters) > 15 (sec)
> Transmitter 1 Link Code (Off/On, 000000 to 999999) > serial no.
> Transmitter 2 Link Code (Off/On, 000000 to 999999) > serial no.
> Transmitter 3 Link Code (Off/On, 000000 to 999999) > serial no.
> ATOM (Watch) Serial Number > actual
SPECIFICATIONS (CONTINUED)
To Next Page
Loading...
