24
Set Day (Fig. 15)
• Depressing and holding the S button while the DAY Set Point
is flashing will scroll through the Set Points in one-day (01)
increments at a rate of 4 per second from 1 to 31.
• Pressing and releasing the A button momentarily (< 2 sec-
onds) will save the Set Point and/or advance to the MAIN
TIME screen.
NOTE: DAY of the WEEK is set automatically
based upon the Date that has been set.
ALTERNATE TIME (Fig. 16)
• Pressing and releasing the M button momentarily 1 time (< 2
seconds) while the MAIN TIME screen is displayed will
access the ALTERNATE TIME screen.
ALTERNATE TIME (such as the Time at a travel destination) is
identified by a lazy 8 symbol located to the left of the Day of the
Week graphic in the upper row (Fig. 16a).
Fig. 16 - Alternate Time
Fig. 15 - Set Day
a
To Next Page
Loading...
