Oceanic ATOM - SURFACE MODE BUTTON OPERATIONS

42
Fig. 36 - Surface Mode (O2)
SURFACE MODE - Button Operations:
> Upper/Left - Mode (M) button
> Upper/Right - Select (S) button
> Lower/Right - Light (L) button
> Lower/Left - Advance (A) button
• Pressing the L button will activate the Backlight.
• Pressing and releasing the A button repeatedly (< 2 seconds
each time) will step through the Dive Surface Sequence of
modes (SURFACE > PLAN > FLY > SAT > LOG > HISTORY).
• Depressing and holding the A button for 2 seconds will
replace the Nitrogen Bar Graph with the O2 Bar Graph and
the O2BG icon for 3 seconds (Fig. 36).
• Depressing both the A and S buttons simultaneously will
access SET Modes D, A, U, and a Serial Number display.
(SURFACE > SET Dive Data > SET Alarms > SET Utilities > SN)
• Pressing and releasing the M button momentarily and repeat-
edly (< 2 seconds each time) will step through the sequence
of Watch Modes.
• Depressing and holding the M button for 2 seconds will revert
to the Local Default Time screen.
ATOM
M
A >l
S >>
L
*