83
• Pressing and releasing the S button momentarily (< 2 sec-
onds) while viewing a PREVIEW screen will display that
dive’s second LOG screen (Nitrogen Data). If that was a
Nitrox dive, pressing/releasing the S button again will
display that dive’s third LOG screen (Oxygen Data). If in
GAUGE MODE (Violated or User Selected), the Oxygen Data
screen will not be displayed.
• LOG screens remain on display until further button occurs.
• Pressing and releasing the A button momentarily (< 2 sec-
onds) button will advance to SURFACE MODE.
• Depressing and holding the M button for 2 seconds will revert
to the SURFACE MODE screen.
• If no button is pressed during a 2 minute period, the unit will
revert to the SURFACE MODE screen.
• Pressing the L button will activate the Backlight.
LOG PREVIEW screen information includes (Fig. 74):
> Alpha graphic LOG.
> Date (month - day or day - month if set for metric).
> Symbol DIVE and dive number (1 to 24) for that series.
> Time of Day the dive began (hr:min) with graphic Am/Pm if
12 Hour Format. This will be the Default Time selected, either
Main or Alternate (with lazy 8 symbol if Alternate).
> Operating Mode symbol NITROX, none if AIR or GAUGE.
Fig. 74 - Log Preview
To Next Page
Loading...
