Need help?Do you have a question about the oConnor 1040 and is the answer not in the manual?
General| Type | Fluid Head |
|---|---|
| Tilt Range | +90° / -75° |
| Pan Range | 360° |
| Drag System | Adjustable |
| Material | Aluminum |
| Payload Capacity | 40 lbs (18 kg) |
Details warning symbols for personal injury, product damage, and general hazards.
Outlines personnel safety, training, and manual handling requirements.
Provides warnings on finger entrapment and tripod load capacity for safe mounting.
Covers risks of non-approved parts and battery replacement guidelines.
Lists the main OConnor 1040 fluid head unit.
Includes the quick release plate for camera mounting.
Specifies the 100mm ball base included in the package.
Details the tie-down mechanism for securing the head.
Includes the pan handle for operating the head.
Provides an extension for the pan handle.
Accessory for organizing items, part number CSE-MFB100.
Accessory for mounting a front box, part number 08308.
Accessory for precise leveling, part number C1504-1000.
Includes various camera plates like Euro and Mini Euro.
Lists compatible tripods and Hi Hats for mounting.
Details different base options like Mitchell and 150mm ball bases.
Illustrates and labels components visible from the front of the head.
Illustrates and labels components visible from the rear of the head.
Instructions on how to mount the head onto standard tripods using the 100mm ball base.
Steps to center the bubble level for proper head leveling on the tripod.
Procedure for removing and installing the camera plate platform on the head.
Guide on positioning the pan handle on the accessory mounting rosettes.
Instructions for mounting the camera securely onto the head's platform.
Guidance on adjusting payload weight and center of gravity for balance.
Detailed steps for setting the balance and counterbalance of the payload.
Explains how to operate the pan and tilt friction locks using the levers.
Details how to adjust the pan and tilt fluid drag using the knobs.
Step-by-step guide for replacing the battery for the bubble level illumination.
Procedure for adjusting the pan and tilt lock levers for proper engagement.
Instructions for adjusting the camera plate clamp for secure mounting.
Specifies the overall height of the fluid head.
Specifies the overall width of the fluid head.
Specifies the overall depth of the fluid head.
Lists the weight of the fluid head with accessories and pan bar.
Indicates the maximum payload capacity of the fluid head.
Specifies the acceptable storage temperature range.
Notes that the bubble level is illuminated.
Describes the tilt range of the fluid head.
Specifies the acceptable operating temperature range.
Identifies the type of battery used for the illuminated bubble level.
To Next Page