10-3
CAR ROOF
HANDRAIL
The limit spring and steel ball in handrail will be caused certain wear and tear
if the car drove on the rough road for a long time, so the handrails should
be inspected regularly in the following manner.
Disassemble /install procedures
1、Keep the vehicle in a horizontal plane.
2、Disassemble the connecting bolts between the handrail and car roof .
3、Inspect the wear consumption of steel ball , if there are pits on the surface of
steel ball and the use is affected。
4、Check whether the limit end of the handrail is seriously worn, such as the lack of material, smoothed flat.
5、Check whether the compression movement of the limit spring is in uniform motion, and the stretch movement
cannot be completed due to resilience blocked.
In case of the above situation,to replace the new one in time.
Check whether there is cracking, aging on the leather cover of car roof pipe.
if so, please replace it with a new one in time.
To Next Page
Loading...