10-2
REAR SEAT
WARNING
Disassemble /install procedures
1、Keep the vehicle on a level surface..
2、Remove the connecting bolts between the rear seat and the frame.
Disassemble the cargo box handle spring, cargo box gas spring,
cargo box support sleeve, etc.
(1) Nylon sleeve
(2) Cargo support sleeve
Check whether the nylon sleeve is badly worn, and replace it in time if it cracks
When the rear seat is used for a long time, it will be damaged, such as cracked leather and broken rubber.
1. Check whether the leather of the seat cushion and backrest
is damaged. If there is any, please replace it with a new seat
cushion or backrest. .
2. When the thickness of the rear seat rubber pad is reduced
by 6 mm (0.24 inches) due to wear, replace the rear seat rubber pad.
Be careful not to operate when the engine is running or the
silencer is at high temperature
To Next Page
Loading...