Odys Multi TV 700 Move - 8.1 DVB-T Installation - Channel Search; 8.2 TV-Channel Selection

ODYS Multi TV 700 Move
16
EN
8.1 DVB-T Installation – channel search
1. Switch on your Multi TV 700 Move. The device displays the main menu.
2. Select the Menu option “Setup” with the keys.
3. Press the “OK” key to display the menu.
4. Select the Menu Option ”Installation” (Menu Settings) using the keys.
5. Choose your desired search method for the channel search using the
keys.
6. It is strongly recommended to choose the Option „Country scan “ (Regional
Scan).
7. Press the “OK” key to display the menu.
8. Using the Keys move between the Area selections.
9. Select “Germany” with the  keys to search available channels in
Germany.
10. Press two times the „OK“ key to start the channel search.
11. Using the „Return“ key to move up one menu level.
12. Use the „EXIT“ key to get back to the main menu.
Note
Whether and how many DVB-T channels can be received by Multi Pocket TV 350,
is strongly depending on the operational place, and the DVB-T signal strength in
this Area.
DVB-T radio in particular is very limited and not available in most locations.
8.2 TV- Channel Selection
1
The DVB-T mode is the standard mode of the device. It starts automatically. Select
TV from the main menu and confirm with OK.
2
Use the number buttons 0-9 on the remote control to select the desired TV program.
3
You can also switch to the stored TV programs going both forwards and backwards
in succession using the  or CH+ and CH- buttons.
4
Set a suitable volume using the Vol+ und Vol- buttons.
5
6
Press the OK key to display the channel overview.
Press the Info key to call the short-key menu.
Program List
Press the key OK in order to display the channel overview.
Select the desired channel using the keys
/. Confirm your choice by pressing the key OK.
Press the EXIT key in order to return to the standard TV mode.