Odys Multi TV 700 Move - System Configuration; 11.1 Channel Manager; 11.2 Channel Search; 11.3 Configuration

ODYS Multi TV 700 Move
23
EN
11 SYSTEM (Configuration)
11.1 Channel Manager
11.1.1 Delete All
Press MENU to enter the main menu. Choose „SYSTEM“ and confirm using the OK
button. Choose the option „Channel Organizer“ and confirm with OK again.
Choose if you want to delete all saved DVB-T TV or DVB-T Radio stations. This is
recommended before performing a new channel search.
Confirm using the ENTER button. During the following security check choose „Yes“ to
confirm and delete.
Choose „No“ to cancel.
Confirm each step by using the OK button.
Caution!
After confirming the security check all Stations will be deleted. All settings
that are relevant for the stations will also be deleted.
11.2 Channel Search
11.2.1 Installation(channel search)
Press the MENU key to enter the main menu. Select „SYSTEM “ and confirm with the
OK key. Select the Option „Installation“ and confirm again with OK.
The channel search can be performed by region (Country scan), manual (Manual
Search) or automatic (Auto Search).
Country scan
Press again the OK key to start the channel search.
Press the EXIT key to get back to the menu.
Note
Please select you region first in the system setup (chapter 11.3).
Manual scan
With the Manual scan you can search for channels manually
Auto Search
with auto search you can determine the Start frequency, End frequency and
Bandwidth and search the channels automatically basis these Parameters.