ODYS Multi TV 700 Move
24
EN
11.3 Configuration
Change important system settings. Choose the setting you want to modify and confirm
using OK.
Choose the different options with / and change the settings by
using///.Confirm with OK.
11.3.1 OSD Settings
Time on OSD The current time will be prompted at the display if on.
OSD Timeout Choose how long the program info after a channel skip or after
choosing “Program Info” from the Quick list will be visible on
screen.
OSD Trans Set the menus transparency.
OSD Language Change the OSD language
1. Audio
Language
If available this language will be used at first for DVB-T
Stations.
2. Audio
Language
If available this language will be used secondary for DVB-T
Stations.
Note
Different languages are used by a few DVB-T stations. If the selected language is not
available the system uses the default station language.
11.3.2 TV Display
TV System Settings for the AV Output.
Note
For older TV Sets it is recommended to switch to PAL
Aspect Ratio Change the display prompt in DVB-T mode.
Note
Normally the setting 4:3 Pan&Scan is recommended.
Specially while watching movies the setting 16:9 could be
better.
This setting is only available in DVB-T mode.
Brightness Set the display brightness (0-100%).
Contrast Set the display contrast (0-100%).
HUE Set the display HUE (-6 - 6).
Saturation Set the display saturation (0 - 12).
To Next Page
Loading...