OEM IPX7A-ION - System Fan Connectors; Serial Ata Connectors

IPX7A-ION Motherboard Reference Guide 15
System fan connectors
Connect the fan cables to the fan connectors on the motherboard, making sure
that the black wire of each cable matches the ground pin of the connector.
7 Connectors
SYS_FAN_TACH
+12V
GND
SYS_ FAN_ PWM
SYS_ FAN2 SYS_ FAN1
Ground
+12V
Rotation
Serial ATA connectors
These connectors are for the Serial ATA signal cables for Serial ATA devices.
SATA0 SATA1
Ground
Ground
Ground
SATA_RX(+)
SATA_RX(-)
SATA_TX(-)
SATA_TX(+)
SATA2 SATA3