IPX7A-ION Motherboard Reference Guide 25
8 BIOS Setup reference
Power
Restore On AC Power Loss
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system goes on after an AC power loss. When set to
[Last State], the system goes into either off or on state, whatever the system state
was before the AC power loss.
Default: [Power off] / Options: [Power Off] [Power On] [Last State]
Power On By Ring
This item allows you to enable or disable Power On By Ring.
Default: [Disabled] / Options: [Disabled] [Enabled]
EUP Mode
This item allows you to enable or disable the EUP mode.
Default: [Enabled] / Options: [Disabled] [Enabled]
To Next Page
Loading...