OHAUS Defender 2000 - Installation; Installation Steps

EN-2 Defender 3000
2. INSTALLATION
Attach Indicator Mounting
and secure Load Cell Cable.
Remove Scale and
Accessories from carton.
Attach Indicator to Bracket.
Attach Bracket to Column.
Connect Power Cord to Indicator.
Plug Power Supply to Wall Outlet.
Install Platform.
Adjust leveling feet.
Remove Shipping
Spacers.**
**Not included with
some models.
x 4
The T32XW is supplied with a grounded power cable.
Use only with a compatible grounded power outlet.