Why won't my OHAUS Defender 3000 turn on?
If your OHAUS Scales indicator won't turn on, first, check the power cord connections to ensure it's properly plugged into both the scale and the power outlet. Then, verify that the power outlet is supplying electricity. If using battery power, recharge the battery. If none of these steps work, service may be required.
How to fix OHAUS Scales that won't zero?
If you cannot zero your OHAUS Scales, first, remove any weights from the pan that exceed the allowable limits. Ensure the weight is stable by waiting for any vibration or movement to cease, or increase the filtering. If the issue persists, service may be required, as the load cell may be damaged.
What does Error 8.1 mean on OHAUS Defender 3000 Scales?
If your OHAUS Scales display Error 8.1, it indicates that the weight reading exceeds the Power On Zero limit. Remove weight from the pan. If the issue persists, recalibrate the scale.
What does error 8.4 mean on OHAUS Defender 3000?
If your OHAUS Scales show Error 8.4, the weight reading is below the Underload limit. Add weight to the pan. If the problem continues, recalibrate the scale.
What does Error 8.2 mean on OHAUS Defender 3000?
If your OHAUS Scales display Error 8.2, it means the weight reading is below the Power On Zero limit. To fix this, add weight to the pan. If the issue remains, recalibrate the scale.
What does error 8.8 mean on OHAUS Defender 3000?
If your OHAUS Scales display Error 8.8, the factory calibration data in the EasyConnectTM module on the load cell cable is not valid under LFT off status. Calibrate the scale to resolve this.
What does error 8.9 mean on OHAUS Defender 3000?
If your OHAUS Scales display Error 8.9, it indicates a failure to read the serial number from the EasyConnectTM module, or the serial number does not match the LFT ON status. You can break the seal or replace the original base/indicator. If the issue persists, service is required.
What does error 9.5 mean on OHAUS Defender 3000?
If your OHAUS Scales display Error 9.5, it indicates that calibration data is not present. Calibrate the scale to resolve this issue.
What to do if OHAUS Defender 3000 Scales show Error 8.3?
If your OHAUS Scales display Error 8.3, it means the weight reading exceeds the overload limit. Reduce the weight on the pan to resolve this issue.
Why is the battery symbol flashing on my OHAUS Scales?
If the battery symbol is flashing on your OHAUS Scales, it indicates a low battery. For the i-DT33P model, replace the dry batteries. For the i-DT33XW model, recharge the battery.
General| Display | Backlit LCD |
|---|---|
| Calibration | External calibration |
| Power | AC adapter or internal rechargeable battery |
| Construction | Stainless steel platform |
| Interface | RS232 |
| Operating Temperature | -10°C to 40°C |
| Units of Measurement | kg, lb, oz |
| Approvals | NTEP |
| Readability | 0.1g |
| Platform Size | 305 x 305 mm to 600 x 800 mm |
To Next Page
