Oki B 410dn User Manual

Operation > 48
P OWER S AVING M ODE
Power Saving sets how long the printer waits before going into standby mode. In standby
mode your printer’s energy consumption is reduced. You can specify the length of time
before a printer enters power saving mode by setting a larger value.
CHANGING THE LENGTH OF TIME BEFORE ENTERING POWER SAVING MODE
B410d and B410dn
Use the Menu Setup Tool
1. Select Start > Programs > Oki Data > OKI B410 printer Menu Setup Tool > Printer
Menu Setup Tool.
2. Double-click System Configuration Menu then select Power Save Time.
3. Click on the drop-down menu and select the desired power save time (1 to 240
minutes).
4. Click Setup > Apply the Changed Setting. The setting change is completed when
a message dialog box appears saying “ The setting has been applied to the printer.”
5. Click OK.
B420dn and B430dn
Use the Printer Menu via the Operator Panel
1. Press the Menu or button until System Configuration Menu appears.
Press .
2. Press or until Power Save Time appears. Press .
3. Press or until the desired setting appears (1 to 240 minutes). Press .
An asterisk (*) will appear to confirm the selection.
4. Press Online.
DISABLING POWER SAVING MODE
B410d and B410dn
Use the Menu Setup Tool
1. Select Start > Programs > Oki Data > OKI B410 printer Menu Setup Tool > Printer
Menu Setup Tool.
2. Double-click Maintenance Menu then click Power Save Mode.
3. Click on the drop-down menu and select Disable.
4. Click Setup > Apply the Changed Setting. The setting change is completed when
a message dialog box appears saying “ The setting has been applied to the printer.”
5. Click OK.
NOTE
The printer’s Power Save mode default setting is Enabled, 10 minutes.
Downloaded From ManualsPrinter.com Manuals

Oki B 410dn Specifications

General

Brand	Oki
Model	B 410dn
Category	Printer
Language	English