Oki Data CONFIDENTIAL
43641601TH Rev.1
41 /
e personnel and should be hidden from end
users.
This menu is provided in a PJL file when necessary.
JPOEM1JPOEM2OEMAOEMLOEM (1), JPOEM2: Japanese OEM (2),
OEMA: Overseas OEM set to A4 by default, OEML: Overseas OEM set to
Letter by default Selecting a brand will automatically starts a reboot.
MAINTE
MENU
FL FORMT EXECUTE Initializes a flash ROM forcibly.
Every flash ROM installed is subject to initialization.
EEPROM RESET Initializes the EEPROM.
Special items, such as a MAC address, are not initialized.
CONFIG
MENU
CODESET TYPE1
*
TYPE2
Sets whether to view Russian/Greek or not.
TYPE1: Not view Russian/Greek.
TYPE2: Views Russian/Greek.Panels supporting Russian/Greek cannot display Japanese characters. On a printer intended for use in Japan, select TYPE1 and use a conventional panel.
ENG STAT ENG STAT PRINT Prints engine information.
PAGE PRT PAGE PRT ENABLE
*
DISABLE
Sets printing or not printing the total page count in PRINT MENU MAP.
DOTSHIFT TRAY -4.0mm
-1.5mm
-1.0mm
-0.5mm0.0mm+0.5mm
*+1.5mm
+3.5mmontal shift of the dot position when printing from Tray 1.
This area isn’t initializ
ed by the EEPROM reset operation due to upgrading of
ROM version and so on.
MANUAL -4.0mm
-0.5mm
0.0mm
+0.5mm
*+1.5mm
+3.5mm
Set hor
izontal shift of the dot position when printing from the manual slot.
This area isn’t initialized by the EEPROM reset operation due to upgrading of
ROM version and so on.
NETWORK Details are described in the NETWORK specification.
ENG DIAG Enters the Engine Maintenance menu.
This page intentionally left blank