Oki B2200 - 3 Adjustment; Administrator Menu

Oki Data CONFIDENTIAL
43641601TH Rev.1
40 /
This chapter provides explanations on adjustments required when replacing parts. Adjustments are
made by changing parameter values stored in the EEPROM on the main control board. The parameters
can be set on the status monitor. This printer has three kinds of maintenance modes (menus), and it is
necessary to select one of the modes when replacing any parts.
3.1 Administrator Menu
To view Admin MENU, open the Status Monitor and select Printer Settup then click on Open Configuration.
Click on "Display" and put a check next to "Administrator Menu". A pop up will display " Do you want to
display Administrator menu?". Click on Yes. Then scroll down to the Administrator Menu.
3. Adjustment
Category Item Value Functions
OP MENU ALL ENABLE
DISABLE
Sets whether to enable or disable all categories of User Menu.
When set to Disable, User Menu is not displayed. The following items
are not displayed if this category is disabled. This menu must be set to
DISABLE to lock the panel.
INFO. ENABLE
DISABLE
Sets whether to enable or disable the INFORMATION menu. When set to
Disable, the INFORMATION menu of User Menu is not displayed.
PRINT ENABLE
DISABLE
Sets whether to enable or disable the PRINT menu. When set to Disable,
the PRINT menu of User Menu is not displayed.
MEDIA ENABLE
DISABLE
Sets whether to enable or disable the MEDIA menu. When set to Disable,
the MEDIA menu of User Menu is not displayed.
SYS CONF ENABLE
DISABLE
Sets whether to enable or disable the SYSTEM CONFIG menu. When set
to Disable, the SYSTEM CONFIG menu of User Menu is not displayed.
PARALLEL ENABLE
DISABLE
Sets whether to enable or disable the PARALLEL menu. When set to
Disable, the PARALLEL menu of User Menu is not displayed.
USB ENABLE
DISABLE
Sets whether to enable or disable the USB menu. When set to Disable,
the USB menu of User Menu is not displayed.
NETWORK ENABLE
DISABLE
Sets whether to enable or disable the NETWORK menu. When set to
Disable, the NETWORK menu of User Menu is not displayed.
MEMORY ENABLE
DISABLE
Sets whether to enable or disable the MEMORY menu. When set to
Disable, the MEMORY menu of User Menu is not displayed.
ADJUST ENABLE
DISABLE
Sets whether to enable or disable the SYSTEM ADJUST menu. When set
to Disable, the SYSTEM ADJUST menu of User Menu is not displayed.
MAINTE ENABLE
DISABLE
Sets whether to enable or disable the MAINTENANCE menu. When set
to Disable, the MAINTENANCE menu of User Menu is not displayed.
USAGE ENABLE
DISABLE
Sets whether to enable or disable the USAGE menu. When set to Disable,
the USAGE menu of User Menu is not displayed.