Oki B2200 - 4 Periodical Maintenance; Periodical Replacement Parts; Cleaning; Cleaning of LED Lens Array

Oki Data CONFIDENTIAL
43641601TH Rev.1
46 /
4.2 Cleaning
Remove any toner or dust accumulated inside the printer. Clean inside and around the printer with a
piece of cloth when necessary. Use the handy cleaner (service tool) to clean inside the printer.
Note: Do not touch the image drum, LED lens array, or LED head connector block.
4.2.1 Cleaning of LED Lens Array
Clean the LED lens array or replace the toner cartridge when white lines or stripes (void, light printing)
are generated vertically down the page, as shown below.
Note: T
he LED lens array must be cleaned with a soft tissue or cloth after static electricity collected
on maintenance personnel is discharged.
4. PERIODICAL MAINTENANCE
White lines or stripes
(Void, light printing)
4.1 Periodical Replacement Parts
The parts specified below are to be replaced periodically.
Part name Condition for replacement Cleaning Remarks
• Toner cartridge (Type 11) About 2,000 sheets of
paper have been printed.
• LED head Consumables
• Image drum cartridge
(Type 11)
About 10,000 sheets of
paper have been printed.
See 1.3 (14).
Consumables