Oki Data CONFIDENTIAL
43641601TH Rev.1
45
3.2.1 Uploading/Downloading EEPROM Data
When the printed circuit board of the controller is replaced, the contents of the old EEPROM must
be copied to a new EEPROM on a new board to save customer settings. To perform this, use a
maintenance utility.
The method of operating the maintenance utility, refer to Maintenance Utility Operating Manual.
The maintenance utility is designed to be used only by field engineers and should not be released to
end users.
Part Replacedt
Image drum cartridge Reset the image drum counter. (Refer to User's
manual).
Main control board Upload/Download EEPROM data.
This page intentionally left blank
To Next Page
Loading...
