Why does my Oki B430DN Printer print a graphic image partly on one page?
If your Oki Printer is printing a graphic image partly on one page and partly on the next, it indicates insufficient printer memory for this image at this resolution. Try changing the resolution, reducing the image size, or installing more memory in your printer.
Why does my Oki B430DN Printer produce odors?
If your Oki Printer is producing odors, gases are likely being given off by forms or adhesives passing through the hot fusing unit. Ensure the forms you use can withstand heating, and provide adequate ventilation.
How to fix INPUT JAM on Oki B430DN Printer?
If you have an INPUT JAM on your Oki Printer, remove the paper tray from the printer. Remove any crumpled or folded paper. Remove any paper from the underside of the printer. Replace the paper tray.
Why is my Oki B430DN Printer printing entire page faintly?
If the entire page prints faintly on your Oki Printer, it could be due to an empty toner cartridge. Install a new toner cartridge. Another possible cause is a dirty LED array, which requires cleaning.
How to fix FEED JAM OR EXIT JAM on Oki Printer?
If your Oki Printer has a FEED JAM OR EXIT JAM, remove the tray and clear any misfed sheets. Then, press the cover release and open the printer’s top cover.
What to do if my Oki B430DN Printer is ready but not printing?
If your Oki Printer is on and indicates it is ready to receive data, but nothing happens when you try to print, it could be a configuration error. Check the cable connection. If more than one printer is available, make sure your printer has been selected.
What to do if my Oki B430DN prints blank sheets?
If your Oki Printer is printing blank sheets, it might be due to the image drum cartridge not being properly installed. Try reinstalling it. Also, check if the toner cartridge is empty or missing; if so, install a new toner cartridge.
How to fix faded print on my Oki B430DN Printer?
If your Oki Printer is producing faded prints, it could be due to the toner cartridge not being correctly installed or the toner being low. Ensure the toner cartridge is correctly installed. If the issue persists, replace the toner cartridge.
Why is my Oki B430DN Printer printing faintly?
If your Oki Printer is printing entire pages faintly, it may be due to an empty toner cartridge. Install a new toner cartridge. Alternatively, the LED array might be dirty, so try cleaning it.
Why is my Oki B430DN Printer's print light and blurred?
If the print from your Oki Printer appears light or blurred, it could be due to several reasons. First, check if the toner is low and replace the toner cartridge if needed. Also, ensure that you are using paper specifically designed for laser printers. Lastly, a dirty LED array can cause this issue, so try cleaning it.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 5.5 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Internal memory | 64 MB |
| Processor model | PowerPC405 |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Envelopes sizes | C5, C6, DL |
| Media weight (tray 1) | 60 - 120gsm |
| Paper tray media types | Envelopes |
| Non-ISO print media sizes | Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP:-ARP, IPv4/v6, TCPv4, ICMPv4/v6, UDPv4/v6, LPR, FTP, TELNET, HTTP(IPP), BOOTP, DHCP, AutoIP, SNMP, DNS, uPnP, Bonjour, WINS, Windows Rally(WSD-Print, LLTD), SLP, JetDirect protocols. Netware 3.x, 4.x, 5.x, and 6 with full NDS and NDPS support:- QServer over IP and IPX, R-Printer, N-Printer, NCP, SPX, IPX, SAP, RIP, Ethertalk:- ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP, NetBEUI: SMB, NetBIOS |
| Power requirements | 230 VAC, 50 - 60Hz |
| Networking features | 10/100BaseTX |
| Compatible operating systems | Windows 2000 / XP / XP x64 / Server 2003 / Server 2003 x64 / Vista (32-bit) / Vista (64-bit) / UNIX / Linux; Mac OS X PowerPC 10.2.8 + / OS X Intel 10.4.4 + |
| Display | LCD |
| Maximum duty cycle | 70000 pages per month |
| Operating temperature (T-T) | 10 - 32 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Dimensions (WxDxH) | 268 x 369 x 395 mm |
|---|
To Next Page
