What to do if my Oki B430DN Printer doesn't resume printing after clearing a paper jam?
If your Oki Printer doesn't resume printing after you've removed the jammed paper, try opening and closing the top cover.
Why won't my Oki B430DN Printer print even though it's ready?
If your Oki Printer indicates it's ready to receive data but nothing happens when you try to print, it could be a configuration error. Check the cable connection. Also, if multiple printers are available, ensure your printer is selected as the active printer.
Why is my Oki B430DN printing garbage?
If your Oki Printer is producing garbage prints, the issue might be due to an incorrect cable configuration. Check the cable configuration, continuity, and length.
Why does my Oki Printer keep paper jamming and feeding multiple sheets?
Frequent paper jams and multiple sheets feeding at once in your Oki Printer can occur if the printer is on an unstable surface; place it on a flat, stable surface. Ensure you're using the correct type of paper and storing it properly. Align the paper edges with the paper guides. Load several sheets of paper into the tray. If you're adding paper, remove the existing stack first, align the new sheets, and then reload the tray. Remember that postcards, envelopes, label sheets, and transparencies should be loaded into the Manual Feed tray or Multi Purpose tray in the correct orientation, not the Paper tray.
Why is the print faded on my Oki Printer?
If you are experiencing faded print with your Oki Printer, ensure the toner cartridge is correctly installed. If it is, the toner may be low, so try replacing the toner cartridge.
Why is the printed page light or blurred on my Oki B430DN?
If your Oki Printer is printing pages that are light or blurred, it could be due to several reasons. It may be that the toner is low, in which case you should replace the toner cartridge. Ensure that you are using paper meant for laser printers. Also, a dirty LED array can cause this issue, so try cleaning the LED array.
Why are bold characters and dark lines smeared on my Oki B430DN Printer prints?
If bold characters and dark lines are smeared when printing with your Oki Printer, it is likely that the toner is low. Install a new toner cartridge to resolve this issue.
Why does my Oki B430DN Printer have vertical white streaking or faint areas on the page?
If your Oki Printer displays a vertical white streaking or faint areas on the page, it could be due to low toner that does not distribute properly, or a worn-out drum. Replace the toner cartridge. Check the drum and replace it if necessary. Contact service.
Why does my Oki B430DN produce smeared or blotched prints?
If your Oki Printer is printing smeared or blotched prints, the issue may be due to dirty rollers, toner dropped inside the printer, or an image drum problem. Replace the image drum and toner. Contact service.
Why does my Oki Printer print all black?
If your Oki Printer prints all black, this indicates a hardware problem. Contact service.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 5.5 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Internal memory | 64 MB |
| Processor model | PowerPC405 |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Envelopes sizes | C5, C6, DL |
| Media weight (tray 1) | 60 - 120gsm |
| Paper tray media types | Envelopes |
| Non-ISO print media sizes | Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported network protocols (IPv4) | TCP/IP:-ARP, IPv4/v6, TCPv4, ICMPv4/v6, UDPv4/v6, LPR, FTP, TELNET, HTTP(IPP), BOOTP, DHCP, AutoIP, SNMP, DNS, uPnP, Bonjour, WINS, Windows Rally(WSD-Print, LLTD), SLP, JetDirect protocols. Netware 3.x, 4.x, 5.x, and 6 with full NDS and NDPS support:- QServer over IP and IPX, R-Printer, N-Printer, NCP, SPX, IPX, SAP, RIP, Ethertalk:- ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP, NetBEUI: SMB, NetBIOS |
| Power requirements | 230 VAC, 50 - 60Hz |
| Networking features | 10/100BaseTX |
| Compatible operating systems | Windows 2000 / XP / XP x64 / Server 2003 / Server 2003 x64 / Vista (32-bit) / Vista (64-bit) / UNIX / Linux; Mac OS X PowerPC 10.2.8 + / OS X Intel 10.4.4 + |
| Display | LCD |
| Maximum duty cycle | 70000 pages per month |
| Operating temperature (T-T) | 10 - 32 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Dimensions (WxDxH) | 268 x 369 x 395 mm |
|---|
To Next Page
