B710, B720, B730 User’s Guide > 40
Unusable Media
CaUTION!
Using the following types of media might cause paper jams,
malfunctions or damage to the printer. Do not use them.
• Fuji Xerox full-color transparencies (example: V556, V558,
V302)
• Paper exclusively for ink-jet printer use
• Paper that is too thick or thin
• Paper that has been printed on before (including color
printing)
• Wrinkled, folded or torn paper
• Wet paper
• Curled paper
• Paper with static electricity
• Adhesive paper
• Paper with special coatings
• Treated colored paper
• Paper using ink that will run at a temperature of 302°F
(150°C).
•Thermal paper
• Carbon paper
• Paper with staples, paper clips, ribbons or tape
• Paper with rough surfaces such as pulp paper or fibrous paper
• If acid paper is used, the characters might appear fuzzy.
Replace it with alkaline paper.
• Labels that do not fully cover the adhesive backing
To Next Page
