Introduction> 10
S
WITCHES
Operation
The switches are labelled ON LINE and CANCEL and each has
three modes of operation as follows:
Function
The results of operating the switches in different contexts are
summarised below.
MODE OF
OPERATION
DESCRIPTION
Momentary press
(Press 1)
Press the switch and release it within 2 seconds of
pressing it. The operation starts immediately the
switch is released.
2-second press
(Press 2)
Press the switch and release it between2 and 5
seconds after pressing it. The operation starts
immediately the switch is released (except at job
cancellation).
5-second press
(Press 5)
Press the switch and hold it for 5 seconds or more.
The operation starts 5 seconds after pressing the
switch, even if you hold it pressed for more than 5
seconds.
STATUS
BEFORE
PRESSING
ONLINE SWITCH CANCEL SWITCH
PRESS
1
PRESS
2
PRESS
5
PRESS
1
PRESS
2
PRESS
5
ON LINE
(idling
mode)
Shifts to
OFF LINE
Prints
Menu
Map
(*1)
Prints
Demo
Print
–––
OFF LINE
(idling
mode)
Shifts to
ON LINE
Prints
Menu
Map
(*2)
prints
Demo
Print
(*2)
– – –
ON LINE
(data being
received,
processing
or printing)
Shifts to
OFF LINE
–– –Cancels
job
(*3)
–
To Next Page
Loading...
Need help?
General
