Introduction> 11
*1: The Menu Map (or Status Page) provides details of printer
settings and status information.
*2: Shifts to ON LINE after printing has started.
*3: Executes job cancellation 2 seconds after start of switch
operation (even if the switch is held down longer).
LED
DISPLAYS
General
Printer status (as indicated by the LEDs) can be broadly
categorised as follows:
1. Normal status: the printer is operating normally e.g. it is
ON LINE or processing.
2. Warning status: you can continue to use the printer
without intervention but an error may result.
Requesting
manual
feed, no
paper in MP
Tray or
paper size
mismatch
Starts
paper
supply
– – – Cancels
job
(*3)
–
No paper in
Tray 1 o r
Tray 1 o pen
––––Cancels
job
(*3)
–
Memory
overflow or
invalid data
Recovers
from the
error and
shifts to ON
LINE
– – – – –
Paper jam – – – – – –
At cover
open/close
after the
waste toner
has become
full
Recognises
the toner
has been
changed
– – Recognises
the toner
has not
been
changed
– –
STATUS
BEFORE
PRESSING
ONLINE SWITCH CANCEL SWITCH
PRESS
1
PRESS
2
PRESS
5
PRESS
1
PRESS
2
PRESS
5
To Next Page
Loading...
Need help?
General
