Introduction> 12
3. Error status: you cannot continue to use the printer.
Intervention is required to recover from the error. Fatal
errors are irrecoverable and require a service call.
When several different status situations occur concurrently, only
the status with the highest priority is displayed on the LEDs.
Warning status combined with the highest-priority normal status
is displayed on the LEDs.
Function
A summary of the functions of each LED is given below:
Illumination and meaning
To be able to indicate a large number of status situations both
individually and in combination, the LEDs are illuminated as
follows:
LED FUNCTION
Power
(Ready)
Indicates POWER ON, ON LINE, OFF LINE, power saving,
data receiving, printing, job cancelling, warming up,
density adjustment/temperature adjustment in progress
Paper Indicates paper out warning/alarm, manual feed request
Consumable Indicates consumables life warning/alarm, consumables
installation error
Alarm Indicates paper jam, cover open error
LED ILLUMINATION STATUS
Power
(Ready)
Green
OFF Power OFF
ON ON LINE (idle)
Blinking 1 (2S cycle) OFF LINE (this blinking pattern
always takes place while an
error is occurring)
Blinking 2 (500mS cycle) Data being received, printing,
warming up, density
adjustment/temperature
adjustment in progress
Blinking 3 (120mS cycle) Job cancelling in progress
Blinking 4 (4.5S ON and
500mS OFF)
Power saving mode
To Next Page
Loading...
Need help?
General
