Why is my Oki Printer wrinkling media?
If your Oki Printer is producing wrinkled media, it could be due to moisture. Remove the moist media and replace it with new, dry media. Also, the media feed roller or fuser unit might be defective, so check them for damage. If necessary, contact Technical Support with the error information.
Why is my Oki Printer printing blank pages?
If your Oki Printer is printing blank pages, one or more of the toner cartridges may be defective or empty, so check the toner cartridges. Also, the wrong media may be in use, so check that the media type set in the driver matches the media loaded in the printer.
What to do if my Oki C110 is misfeeding media?
If your Oki Printer is experiencing media misfeeds, it could be due to several reasons. First, remove the misfed media and reposition the media properly in the tray. If that doesn't work, check the following: 1. Ensure that the number of sheets in the tray does not exceed the maximum allowed. 2. Adjust the media guides in Tray 1 to match the size of the media. 3. Make sure warped or wrinkled media is not loaded in the tray. 4. If using label sheets, ensure they are loaded according to the manufacturer’s instructions. 5. Unsupported media is not being used. Consult “Print Media” on page 30. 6. The media feed roller is clean. For more details, refer to “Interior” on page 69.
Why is my Oki C110 Printer printing nothing?
If your Oki Printer is not printing anything, or there are blank spots on the printed page, it could be due to several reasons. First, check the toner cartridges for damage. If they are fine, inspect the imaging cartridge for defects and replace if necessary. Ensure the media is not moist; if it is, replace it with dry media. Verify that the media set in the printer driver matches the media loaded in the printer. Also, confirm that the power source matches the printer specifications. If multiple sheets are being fed at once, remove the media and check for static electricity, fanning the paper before replacing it. Finally, ensure the media is properly set in the tray, straightening it out and realigning the media guides if needed.
How to fix unusual noises from Oki C110 Printer?
If you are hearing unusual noises from your Oki Printer, ensure that the printer is on a flat, hard, level surface. If the noise persists, there might be a foreign object stuck inside the printer. Turn off the printer and attempt to remove the object. If you cannot remove it, contact Technical Support.
What to do if my Oki C110 is making unusual noises?
If you hear unusual noises from your Oki Printer, put the printer on a flat, hard, level surface. Also, check for any foreign object stuck inside the printer, and remove it. If you cannot remove it, contact Technical Support.
Why is the media wrinkled when printed from my Oki C110?
If the media is wrinkled when printed by your Oki Printer, it may be moist from humidity or have water spilled on it, so replace it with new, dry media. The media feed roller or fuser unit could also be defective, so check them for damage. If you are using unsupported media, consult the 'Print Media' section.
Why do the colors look wrong on my Oki C110 Printer?
If the colors look drastically wrong when printing with your Oki Printer, one or more of the toner cartridges may be defective. Remove the toner cartridges and verify that the toner is distributed evenly on each cartridge roller, and then reinstall the toner cartridges.
Why are colors not registering properly on Oki Printer?
If colors are not registering properly, or you notice colors are mixed or have page-to-page variation on your Oki Printer, it might be due to the imaging cartridge not being correctly seated. Remove the imaging cartridge and reinstall it. Also, one or more of the toner cartridges may be defective, so remove them and check for damage, replacing any damaged cartridges. Finally, the media could be moist from humidity, so replace it with new, dry media.
Why is my Oki Printer's image too light?
If your Oki Printer is printing images that are too light or have low image density, several factors could be responsible. First, clean the print head window. If the issue persists, check if the media is moist and replace it with dry media. Additionally, the toner cartridge may be low; try replacing it. Defective toner cartridges can also cause this issue, so inspect them for damage. Finally, ensure the media type is correctly set in the printer driver, especially when printing labels, postcards, thick stock, or letterheads.
General| Color | Yes |
|---|---|
| Duplex printing | No |
| Maximum resolution | 600 x 1200 DPI |
| Time to first page (black, normal) | 13 s |
| Time to first page (color, normal) | 22 s |
| Print speed (black, normal quality, A4/US Letter) | 19 ppm |
| Print speed (color, normal quality, A4/US Letter) | 5 ppm |
| Internal memory | 16 MB |
| Sound power level (standby) | 29 dB |
| Sound pressure level (printing) | 51 dB |
| Total input capacity | 200 sheets |
| Total output capacity | 100 sheets |
| Maximum print size | 216 x 356 mm |
| ISO A-series sizes (A0...A9) | A4, A5 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Supported media weight(s) | 60/209 g/m² |
| Compatible operating systems | Windows 2000 / XP / XP x64 / Vista (32 bit) / Vista (64 bit) / Server 2003 / Server 2003 x64 / Server 2008 / Server 2008 x64 |
| Maximum operating temperature range (T-T) | 10 - 35 °C |
| Recommended operating temperature range (T-T) | 15 - 25 °C |
| Maximum duty cycle | 250 pages per month |
| Sustainability certificates | ENERGY STAR |
| Power consumption (printing) | 440 W |
| Power consumption (PowerSave) | 14 W |
| Storage temperature (T-T) | -20 - 40 °C |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating relative humidity (H-H) | 15 - 85 % |
Weight and Dimensions| Dimensions (WxDxH) | 396 x 380 x 275 mm |
|---|
To Next Page
