Why does my Oki C130n Printer keep resetting or turning off?
The Oki printer may be resetting or turning off frequently because the power cord is not correctly plugged into the outlet. Turn off the printer, make sure that the power cord is correctly plugged into the outlet, and then turn on the printer. If the issue persists, it may be due to a system error.
How to fix Oki Printer media misfeed message?
If the media misfeed message remains on, open and close the top cover again to reset the printer. Also, recheck the media path and remove any misfed media that may still be inside the printer.
What causes duplex problems with my Oki Printer?
Duplex problems can occur if the media or settings are incorrect. For autoduplexing, ensure you have a duplex option installed and that you are using the correct media. Only Letter/A4 plain paper can be autoduplexed. Do not duplex labels, postcards, thick stock, letterheads, or plain paper with a size other than Letter/ A4.
Why is my Oki Printer duplex option misfeeding?
The duplex option may misfeed due to unsupported media. Use good quality recommended media. Also, recheck the media path inside the duplex option and remove all misfed media.
How to troubleshoot media misfeeds on my Oki C130n?
The Oki Printer may be misfeeding media because the media isn't positioned correctly in the tray. Remove the misfed media and reposition it properly. Also, if there are too many sheets in the tray, remove the excess. Ensure the media guides are adjusted to the media size. Warped or wrinkled media can also cause misfeeds, so remove and smooth it out, or replace it if necessary. Moist media should be replaced with dry media. Tray 2 is not designed for custom-sized media, labels, postcards, or thick stock; use Tray 1 for these. Load label sheets according to the manufacturer’s instructions. Using unsupported media can cause this problem, so use recommended media. A dirty media feed roller can also cause misfeeds; clean it as described in the manual.
How to fix duplex problems on my Oki C130n?
If you are having duplex problems with your Oki Printer, and for autoduplexing, make sure that you have a duplex option installed. Ensure you're using the correct media; only Letter/A4 plain paper can be used for autoduplexing. Avoid using labels, postcards, thick stock, letterheads, or plain paper of other sizes. Don't mix media types in Tray 1. You should also check the duplex settings in the printer driver to ensure 'Double-sided' is selected in the Layout tab.
What to do if I can't print the configuration page on my Oki Printer?
If you can't print the configuration page on your Oki Printer, make sure that at least Tray 1 is loaded with media, in place, and secure. Also, clear any media misfeeds.
What causes the duplex option to misfeed on my Oki C130n Printer?
If the duplex option on your Oki Printer is misfeeding, it could be due to using unsupported media. Use good quality recommended media. Also, recheck the media path inside the duplex option and remove any misfed media.
Why is my Oki Printer not turning on?
The Oki Printer may not be turning on because the power cord isn't properly connected to the outlet. To fix this, turn off the printer, ensure the power cord is securely plugged into the outlet, and then turn the printer back on. Another possibility is an issue with the outlet itself. Try plugging another device into the outlet to see if it works. Also, check that the power switch is in the 'I' (on) position. If the printer is connected to an outlet with incorrect voltage or frequency, use a power source that matches the specifications.
Why does my Oki C130n Printer feed several sheets at once?
If your printer is feeding several sheets together, it could be because the front edges of the media are not even. Remove the media and even up the front edges, then reload it. Also, the media may be moist from humidity, so remove the moist media and replace it with new, dry media.
General| Paper Capacity | 250 sheets |
|---|---|
| Operating System Compatibility | Windows, Mac OS, Linux |
| Duplex Printing | Manual |
| Connectivity | USB 2.0 |
| Media Sizes Supported | A4, A5, Letter, Legal |
| Media Types | Plain Paper, Labels, Envelopes |
| Printer Type | Color Laser Printer |
To Next Page
