123 - C130n User’s Guide
Preventing Media Misfeeds
Make sure that...
" Media matches the printer specifications.
" Media is flat, especially on the leading edge.
" The printer is on a hard, flat, level surface.
" You store media in a dry location away from moisture and humidity.
" You always adjust the media guides in Tray 1 after inserting the media (a
guide that is not properly adjusted can cause poor print quality, media
misfeeds, and printer damage).
" You load the media printing-side up in the tray (many manufacturers place
an arrow on the end of the wrapper to indicate the printing side).
Avoid...
" Media that is folded, wrinkled, or excessively curled.
" Double feeding (remove the media and fan the sheets—they may be
sticking together).
" Loading more than one type/size/weight of media in a tray at the same
time.
" Overfilling the trays.
" Allowing the output tray to overfill (the output tray has a 100-sheet
capacity—misfeeding may occur if you allow more than 100 sheets of
media to accumulate at one time).
To Next Page
Loading...
Need help?
General
