Oki C130n - Page 45

45 - C130n User’s Guide
ETHERNET
(cont.)
IPX/SPX FRAME TYPE Settings AUTO, 802.2, 802.3, ETHER II,
SNAP
Specify the protocol used with NetWare.
ETHERNE
T SPEED
Settings AUTO, 100 FULL DUPLEX, 100 HALF DUPLEX, 10
FULL DUPLEX, 10 HALF DUPLEX
Specify the transmission speed for the network and the transmission
method for bi-directional transmission.
DISABLE
802.1X
Settings YES, NO
If YES is selected, IEEE802.1x function is enabled.
If NO is selected, IEEE802.1x function is disabled.
PS
PROTOCOL
Settings BINARY, QUOTED BINARY
Select whether PostScript jobs are received in the binary format or
the quoted format.
USB ENABLE Settings YES, NO
If YES is selected, USB is enabled.
If NO is selected, USB is disabled.
JOB
TIMEOUT
Settings
0-60-999
Specify the length of time (in seconds) until the print job being
received is timed out when USB is being used.
Interface Menu
Note All factory default values are shown in bold.
Downloaded From ManualsPrinter.com Manuals