60 - C130n User’s Guide
Loading Media
1 OPen the ream of paper and take off the top and bottom sheets.
2 Holding a stack of approximately 200 sheets at a time, fan the stack to
prevent static buildup before inserting it in a tray.
Important!
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single
media type except plain paper.
Continuous printing on media other than plain paper (such as
labels, or thick stock) may adversely affect print quality or reduce
engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
CAUTION
Do not mix media of different types and sizes, as this will cause
media misfeeds.
Tray 1 (Multipurpose Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to
“Print Media” on page 53.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
