Introduction> 15
LED
DISPLAYS
General
Printer status (as indicated by the LEDs) can be broadly
categorised as follows:
1. Normal status (Green): the printer is operating normally
e.g. it is ON LINE or processing.
2. Warning status (Amber): you can continue to use the
printer without intervention but an error may result.
3. Error status (Amber, blinking): you cannot continue to use
the printer. Intervention is required to recover from the
error. Fatal errors are irrecoverable and require a service
call.
When several different status situations occur concurrently, only
the status with the highest priority is displayed on the LEDs.
Warning status combined with the highest-priority normal status
is displayed on the LEDs.
Function
A summary of the functions of each LED is given below:
LED COLOUR FUNCTION
Power
(Ready)
Green
(static)
Indicates POWER ON, ON LINE, OFF LINE,
power saving, data receiving, printing, job
cancelling, warming up, density
adjustment/temperature adjustment in
progress
Paper Green
(static) and
Amber
(blinking)
Indicates paper out warning/alarm,
manual feed request
Consumable Green
(static) and
Amber
(blinking)
Indicates consumables life warning/alarm,
consumables installation error
Alarm Green
(static) and
Amber
(blinking)
Indicates paper jam, cover open error
To Next Page
Loading...
