Loading Paper> 24
6. For face down printing, make sure the Face Up (rear)
Stacker is closed (the paper exits from the top of the
printer). Stacking capacity is approximately 150 sheets,
depending on paper weight.
7. For face up printing, make sure the Face Up (rear) Stacker
is open and the paper support (1) is extended. Paper is
stacked in reverse order and tray capacity is
approximately 10 A4 sheets, depending on paper weight,
or 1 envelope or 1 sheet of heavier media.
8. Always use the Face Up (rear) Stacker for heavy paper
(card stock etc.).
CAUTION!
Do not open or close the rear paper exit while printing as it
may result in a paper jam.
1
To Next Page
Loading...
Need help?
General
