C5100 Troubleshooting • 143
PROBLEMS PRINTING FROM WINDOWS
Cannot configure for USB connection.
NOTE
• Windows 95 and Windows NT 4.0 do not support USB.
• Windows 98 upgraded from Windows 95 may not support
USB.
• Windows 98 original installation and Windows Me, 2000,
and XP all support USB.
Possible cause Remedy
Computer does not
support USB interface.
Check if there is a USB controller in the
Windows device manager.
USB cable does not meet
specifications.
Use USB cable to specification Ver.1.1.
Interface is disabled. Check that USB interface is set to Enable in the
menu (
USB MENU → USB → ENABLE).
Configuration procedure
was not correctly
followed or cancelled.
Configure again from the beginning.
USB cable is
disconnected or faulty.
Reconnect or try another cable.
A USB hub is being used. The printer cannot be used with a USB hub.
Connect the printer and computer directly.
To Next Page
Loading...
Need help?
General
