Oki C5100 - Printer System Adjust Menu Options

C5100: Menu Functions • 82
FLASH
INITIALIZE
[EXECUTE] Initializes Resident Flash memory.
When ENTER is pressed, the
following message displays.
ARE YOU SURE?
YES=ENTER/NO=CANCEL
Press ENTER. The following
message displays:
EXECUTE NOW?
YES=ENTER/NO=CANCEL
Press ENTER, then turn the printer
off. The request to execute FLASH
initialization is put into the memory
and initialization is executed when the
power is turned back on.
System Adjust Menu
Notes:
• Factory default settings are shown in bold.
• Menus/Items with a dagger (†) only appear when the Duplex Unit
is installed.
Item Settings Explanation
X ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
horizontally in 0.25
increments.
Y ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
vertically in 0.25 increments.
DUPLEX X
ADJUST
†
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
of print face horizontally in
0.25 increments.
DUPLEX Y
ADJUST†
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
of print face vertically in 0.25
increments.
Memory Menu (cont.)
Note: Factory default settings are shown in bold.
Item Settings Explanation