C5100: Using the Printer Driver • 34
Duplex Printing (Printing on Both Sides of The Paper)
98 / Me / XP / NT 4.0
• Standard paper sizes only.
• Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
²
).
• Paper must be loaded print side up.
• Any tray (Tray 1, optional Tray 2, MP tray) can be used for duplex
printing.
1. Open the file in your application and select File → Print.
2. In the Print dialog box, select your printer, then:
a. Windows 98/Me/NT4.0: click Properties.
b. Windows XP: click Preferences
NOTE
The optional duplex unit must be installed in the printer and
enabled before duplex printing can be carried out.
NOTE
These instructions explain how to change the settings as
you are printing a job. If you wish to change the settings to
apply to all jobs:
•Click Start → Settings → Printers [Printers and Faxes for
XP].
• Right click the C5100 printer icon, then:
a. Windows 98/Me: select Properties, then click the Printer
Properties tab.
b. Windows XP: select Properties, then click Printing
Preference.
c. Windows NT 4.0: select Document Defaults.
• Follow steps 3, etc., below. Note that the screen for
setting defaults will have more tabs.
To Next Page
Loading...
Need help?
General
